The Peerless & Warwick Discussion Forum

mikerf · mikerf

Can anyone advise if the P1 came with fold down Perspex sun visors as standard? My car had a pair of green tinted ones but I'm uncertain if they were original or after market. I've seen online pics of cars both with and without visors so not sure whether to fit them or not. I can get the Holden ones at a rathe...

richtr · richtr

Are the front and rear flex hoses on a Peerless the same as a TR3A? If not what is the total length of the front left and right hoses and the rear hose. Helping a friend that is repairing one and there are no hoses on it. Thanks much Dean

Keith Williams · Keith Williams

I have researched for some time to determine the source for the interior door handle (door pulls). They are Sunbeam Talbot II circa 1951. The Triumph TR4 units work, but are not the correct shape. Thought this would be helpful to the group. Keith (USA- Kansas)

mikerf · mikerf

As per the title. Can anyone advise the sizes of the bolts that attach the layrub to the diff and prop shaft, please?

mikerf · mikerf

Yes, another door related question. I just bought window channel from Woolies and, yes it will fit the frame but the glass would need to be about 1mm thick to go up and down in it. Can anyone point me in the right direction of the correct channel please? Their Part No. 51 is the one I bought but it's way too ti...

Gary S · Gary S

Jaguar E-type version. Part Number 3840/1. www.jagspares.co.uk Uses a 1 1/8 socket or 28mm if you must. If youre struggling to remove the old one in situ, with the car off the ground, try locking the brakes on via the adjuster nut on each backplate. Saves a removing the rear seat tub And interior trim....

mikerf · mikerf

As per the title, can anyone advise the size and type of the screws/nuts/bolts used to secure the latch plate to the door (specifically the one that goes through the spur wheel) and the catches to the B post.

Keith Williams · Keith Williams

Can anyone let me know from what car the interior door pulls are off of. Mine are broke and I would like to source replacements. Keith

mikerf · Nick Copeland

Hi All, Does anyone have: a. A spare pair of new handbrake cables they are willing to part with? b. A spare cable (complete - condition less important) that could be used as a pattern to make some more new ones? I have been in touch with Speedy Cables who can make new ca...

mikerf · mikerf

Can anyone advise where the battery to earth (+ve, originally) connected to the chassis? I'm keeping the battery in the original position in the boot but changing to -ve earth. Did the original earth connect somewhere at the rear of the chassis? And on the same subject, what route did the original -ve...

Frank · Frank

Update from the MOT shop this morning. LED headlights are back, and legal for a test, so Pass with no advisories this morning. The Warwick is all LED apart from dash warning lights now. I really want period look ones with logos, so watch this space. Supply of replacement components is a problem for ev...

Frank · Frank

Here we go again, MOT time On the left, TR3 front upright top ball joint rubber shroud, 4873 road miles. Same condition both sides, guaranteed MOT fail. Item is status backorder at Moss, price £1.60. complete Ball joint assembly is backorder as well. On the right, ORIGINAL steering ball joint rubb...

mikerf · mikerf

As it's been rather quite on here recently, I thought it's about time someone came along and disturbed the peace and that someone is me!! Simple question really. Is it possible to tighten up the filler cap on to the threaded coupling that goes on the inside of the body with the GRP triangular sections...

Marek · Marek

Dear forum members,as the steering of my Peerless Phase 2 does not work properly anymore, I think a conversion to rack and pinion could be reasonable.Has anyone done this before? Is it a kind of easy to do job an eager enthusiast can manage, or does it require a lot of work?What is the best address to ge...

Peerless door waist seals and profiles · Erik V

First of all i don't know if these are called waist seals on the Peerless, but on other cars they are. I mean the alloy strip that is screwed to the top of the door skin, and holds a thin strip of rubber. On my car these are badly damaged by someone putting self tapping screws through for holding the window fr...

mikerf · mikerf

My understanding regarding knock on hubs has always been that the spinner should screw onto the hub in the direction of forward rotation of the wheel. This, as I understood it, means as the wheel rotates in a forward direction, it has the effect of tightening the spinner. So, in effect, on the right han...

mikerf · mikerf

I'm about to order the windscreen seal from Woolies (R398-358) and wanted to get the bonnet/boot seal at the same time. Would Woolies R100 be the correct selection and would this do for both the bonnet and boot lid? If not, what would be the best choice?

mikerf · mikerf

I think I'm correct in saying the original material in which the P1 dashboards were covered is now unobtainable. Has anyone discovered a suitable alternative? Failing so, I'm considering (heresy, I know) having the dash vinyl wrapped. I've seen some rather tasty leather effect vinyls along with o...

Frank · Frank

When I fitted LED headlight bulbs in October I didn't expect them to be banned, but that's what's happened. They will now result in an MOT failure. When I checked before fitting, HID units were banned, but not LED, but that changed on 1st Jan.I This is a bit dissapointing, seems it's OK for all the MPVs...

mikerf · mikerf

I'm about to start plumbing in the fuel tanks and as part of this I need to order two new filler caps. I notice on both the Rimmer and Moss sites that there is a chrome escutcheon plate and fibre washer (not available) that fit below the cap. Now I can't remember removing an escutcheon plate nor is there one...

Topic		Started By	Replies	Views	Last Post
	Sun visors (Preview) Can anyone advise if the P1 came with fold down Perspex sun visors as standard? My car had a pair of green tinted ones but I'm uncertain if they were original or after market. I've seen online pics of cars both with and without visors so not sure whether to fit them or not. I can get the Holden ones at a rathe...	mikerf	7	625	May 1, 2022 by mikerf
	Peerless brake flex hoses (Preview) Are the front and rear flex hoses on a Peerless the same as a TR3A? If not what is the total length of the front left and right hoses and the rear hose. Helping a friend that is repairing one and there are no hoses on it. Thanks much Dean	richtr	4	734	Apr 15, 2022 by hoadao3493
	Interior Door Handles (Preview) I have researched for some time to determine the source for the interior door handle (door pulls). They are Sunbeam Talbot II circa 1951. The Triumph TR4 units work, but are not the correct shape. Thought this would be helpful to the group. Keith (USA- Kansas)	Keith Williams	2	617	Apr 15, 2022 by hoadao3493
	Layrub bolt sizes. (Preview) As per the title. Can anyone advise the sizes of the bolts that attach the layrub to the diff and prop shaft, please?	mikerf	15	1342	Apr 8, 2022 by nigel c
	Window channel rubber (Preview) Yes, another door related question. I just bought window channel from Woolies and, yes it will fit the frame but the glass would need to be about 1mm thick to go up and down in it. Can anyone point me in the right direction of the correct channel please? Their Part No. 51 is the one I bought but it's way too ti...	mikerf	15	854	Mar 10, 2022 by nigel c
	Diff flange hub nut (Preview) Jaguar E-type version. Part Number 3840/1. www.jagspares.co.uk Uses a 1 1/8 socket or 28mm if you must. If youre struggling to remove the old one in situ, with the car off the ground, try locking the brakes on via the adjuster nut on each backplate. Saves a removing the rear seat tub And interior trim....	Gary S	0	504	Feb 12, 2022 by Gary S
	Door latch Nut/Bolt sizes (Preview) As per the title, can anyone advise the size and type of the screws/nuts/bolts used to secure the latch plate to the door (specifically the one that goes through the spur wheel) and the catches to the B post.	mikerf	7	810	Dec 24, 2021 by mikerf
	Interior Door Pulls (Preview) Can anyone let me know from what car the interior door pulls are off of. Mine are broke and I would like to source replacements. Keith	Keith Williams	6	2510	Nov 6, 2021 by Keith Williams
	Handbrake cables (Preview) Hi All, Does anyone have: a. A spare pair of new handbrake cables they are willing to part with? b. A spare cable (complete - condition less important) that could be used as a pattern to make some more new ones? I have been in touch with Speedy Cables who can make new ca...	Nick Copeland	29	1847	Sep 7, 2021 by mikerf
	Location of earth point (Preview) Can anyone advise where the battery to earth (+ve, originally) connected to the chassis? I'm keeping the battery in the original position in the boot but changing to -ve earth. Did the original earth connect somewhere at the rear of the chassis? And on the same subject, what route did the original -ve...	mikerf	7	570	Aug 10, 2021 by Erik V
	MOT update (Preview) Update from the MOT shop this morning. LED headlights are back, and legal for a test, so Pass with no advisories this morning. The Warwick is all LED apart from dash warning lights now. I really want period look ones with logos, so watch this space. Supply of replacement components is a problem for ev...	Frank	3	602	Jun 8, 2021 by nigel c
	Rubber stuff again (Preview) Here we go again, MOT time On the left, TR3 front upright top ball joint rubber shroud, 4873 road miles. Same condition both sides, guaranteed MOT fail. Item is status backorder at Moss, price £1.60. complete Ball joint assembly is backorder as well. On the right, ORIGINAL steering ball joint rubb...	Frank	12	561	Jun 8, 2021 by nigel c
	Fitting fuel filler cap. (Preview) As it's been rather quite on here recently, I thought it's about time someone came along and disturbed the peace and that someone is me!! Simple question really. Is it possible to tighten up the filler cap on to the threaded coupling that goes on the inside of the body with the GRP triangular sections...	mikerf	2	340	Jun 3, 2021 by mikerf
	Steering conversion (Preview) Dear forum members,as the steering of my Peerless Phase 2 does not work properly anymore, I think a conversion to rack and pinion could be reasonable.Has anyone done this before? Is it a kind of easy to do job an eager enthusiast can manage, or does it require a lot of work?What is the best address to ge...	Marek	19	1688	Apr 7, 2021 by Nick C
	Peerless door waist seals and profiles (Preview) First of all i don't know if these are called waist seals on the Peerless, but on other cars they are. I mean the alloy strip that is screwed to the top of the door skin, and holds a thin strip of rubber. On my car these are badly damaged by someone putting self tapping screws through for holding the window fr...	Erik V	12	855	Mar 25, 2021 by Erik V
	Stupid question about knock on hubs. (Preview) My understanding regarding knock on hubs has always been that the spinner should screw onto the hub in the direction of forward rotation of the wheel. This, as I understood it, means as the wheel rotates in a forward direction, it has the effect of tightening the spinner. So, in effect, on the right han...	mikerf	8	726	Mar 10, 2021 by nigel c
	Boot lid/bonnet seal (Preview) I'm about to order the windscreen seal from Woolies (R398-358) and wanted to get the bonnet/boot seal at the same time. Would Woolies R100 be the correct selection and would this do for both the bonnet and boot lid? If not, what would be the best choice?	mikerf	9	560	Feb 4, 2021 by mikerf
	Dashboard covering (Preview) I think I'm correct in saying the original material in which the P1 dashboards were covered is now unobtainable. Has anyone discovered a suitable alternative? Failing so, I'm considering (heresy, I know) having the dash vinyl wrapped. I've seen some rather tasty leather effect vinyls along with o...	mikerf	1	635	Jan 30, 2021 by nigel c
	LED headlight bulbs BANNED (Preview) When I fitted LED headlight bulbs in October I didn't expect them to be banned, but that's what's happened. They will now result in an MOT failure. When I checked before fitting, HID units were banned, but not LED, but that changed on 1st Jan.I This is a bit dissapointing, seems it's OK for all the MPVs...	Frank	1	433	Jan 28, 2021 by mikerf
	Fuel filler and petrol cap (Preview) I'm about to start plumbing in the fuel tanks and as part of this I need to order two new filler caps. I notice on both the Rimmer and Moss sites that there is a chrome escutcheon plate and fibre washer (not available) that fit below the cap. Now I can't remember removing an escutcheon plate nor is there one...	mikerf	10	673	Dec 18, 2020 by mikerf
«First < 1 2 3 4 … 10 > Last» \| Page of 10 sorted by