The Peerless & Warwick Discussion Forum

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Radiator pipe work


Status: Offline
Posts: 337
Date:
Radiator pipe work


Can anyone advise if the 3 pipes (2 rubber, 1 metal) that make up the connection from the water pump housing to the bottom rad inlet on the TR3/4 be used on the Peerless?

 

I have all 3 pipes, 2 silicon and the metal one in s/s but can't figure out how they fit together to connect the 2 parts. I'm assuming they run under the chassis cross tube but above the steering centre tie rod?

The top hose (TR3) seems to fit perfectly.



__________________


Status: Offline
Posts: 148
Date:

This isn't the greatest picture, but the three components I have are all straight from Moss's TR3 inventory, and go in the path you describe. I have a feeling that I may have shortened the steel tube a tweak for easier fitment, but not sure.

dave



Attachments
__________________

Dave GT2 



Status: Offline
Posts: 337
Date:

Thanks, Dave. I had been thinking that I may have to cut a bit off that tube. Not sure if it needs a bit off both ends or just one. I'll do a trial fit next week. At least I now know that they can be made to fit.

Thanks again.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard