The Peerless & Warwick Discussion Forum

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: HELLO FROM WISCONSIN! Restoring a 1958 LH Drive Peerless GT


Status: Offline
Posts: 14
Date:
HELLO FROM WISCONSIN! Restoring a 1958 LH Drive Peerless GT


I set this account up to start interacting with Peerless people for my Grandfather, Richard Lichtfeld.  He is the owner.  HE also has the only 1916 Peerless Touring car left and has a 1917 as well.   That is what prompted him to purchase this GT 20 years ago and now the time has come to start the restoration.

 

I hope there is still a lot of interest in these cars, I am Grady, age 31, and Grandson of Richard Lichtfeld and want to say hello from Wisconsin.



-- Edited by GT200D62 on Monday 28th of January 2019 08:40:52 PM



-- Edited by GT200D62 on Monday 28th of January 2019 08:41:50 PM

Attachments
__________________

RHL "Collector of Fine Scrap Iron"



Status: Offline
Posts: 451
Date:

Hi Grady and Grandad! really hope to see that V8 in the peerless, its gonna be tight guys biggrin



__________________


Status: Offline
Posts: 39
Date:

Welcome guys!  Hopefully the restoration adventure is a wonderful one!  Keep us updates.

 

Blue skies and green lights - Jim Bolinger (Canton, OH)



__________________


Status: Offline
Posts: 14
Date:

The V-8 is a 1916 Peerless engine that we just restored--I don't think it would be as fast as the original triumph engine although it was ahead of it's time with roller tappets--four barrel two stage carburator W/ accelerator pump--cut out fan and such.


__________________

RHL "Collector of Fine Scrap Iron"



Status: Offline
Posts: 14
Date:

nigel c wrote:

Hi Grady and Grandad! really hope to see that V8 in the peerless, its gonna be tight guys biggrin


 That is actually the motor out of the 1916 peerless.  We are putting the original 2.0L back in rebuilt.  The GT will be pretty close to all original.



Attachments
__________________

RHL "Collector of Fine Scrap Iron"



Status: Offline
Posts: 14
Date:

Here are more pictures.  Looking for info on the de dion rear end currently.



Attachments
__________________

RHL "Collector of Fine Scrap Iron"



Status: Offline
Posts: 45
Date:

Hello Richard,
I am recommissioning a Wisconsin barn find Peerless which belongs to my brother Tom, who lives in Wauwatosa.
This is a remarkably nice car, which had been stored away in the early "70s, with about 40K miles.
What are your questions about the rear end?
Rich



__________________
R.W.HEINRICH


Status: Offline
Posts: 14
Date:

Any diagrams or numbers for replacement seals?  Need to take apart and clean and put back together with new seals and whatever else is needed.  You found a GT in Wauwatosa?



-- Edited by GT200D62 on Wednesday 14th of August 2019 05:04:58 PM

__________________

RHL "Collector of Fine Scrap Iron"



Status: Offline
Posts: 117
Date:

It is basically a Dana 44.  Common to Jags of the era.  My driveline guy had no issue cross referencing or sourcing parts. 

I used an SKF 15788 for the diff seal in the Warwick but in the Peerless we used the set below:

Tinken: 24780 bearing (2) 

            24721 race (2)

            31593 Pin bearing (1)

            31520 Pin race (1)

Dana     44895 Pin seal (1)

National 470548 axle seal (2)

Hope this helps!

Dean



__________________

59' Peerless #213, 61' Warwick GT, 60' Healey BN7, 70' Lotus Europa, 88' M5...



Status: Offline
Posts: 14
Date:

Thanks.  Had several other little projects plus maintaining the other cars and my grandparents house taking my GT time.  but now I am back into it.  Just dropped the differential out and going to send it out soon.  As well as starting to send out chrome pieces to be redone.  Next problems I will have is deciding where to put a fuel cell as the stock tanks make driving it fairly dangerous in likes of collision.  

The other problem is figuring out this OVERDRIVE.  The car came with many extra parts and one driveshaft is slightly different and we seem to have what I think is the Lay**** Overdrive but I am unsure.  I do not think this car had the optional OD but do not know how to know for sure.  Any info on this Lay**** OD for these cars would help.  I would love to have it even if this car didn't have it originally.  I will get progress pics going and keep in closer contact as I know I will need all of your advice and pointers.  My grandfather is not able to do much physically but he is still sharp as a tack mentally and can guide me a long with all of your help.

 

Thanks Everyone

Grady G.  Richard Lichtfeld's Grandson



__________________

RHL "Collector of Fine Scrap Iron"



Status: Offline
Posts: 14
Date:

Next I have to figure out this overdrive system.  As you can see, when we had the motor and trans rebuilt this was not included.  However, I would really like to have this on and in working order.  I posted as many pics as I can.  I see that our transmission's tail piece is long and skinny where some pics I have seen have the Lay**** looking tail end.  I will search the forum again for the overdrive but there were no distinct pictures describing both options and what it would entail to switch it over.  

Please if anyone can even send me a phone number so I can call and get any advice.

Thanks as always.

IMG_1603.JPGIMG_1604.JPGIMG_1605.JPGIMG_1606.JPGIMG_1607.JPGIMG_1608.JPGIMG_1609.JPGIMG_1602.JPGIMG_1488.JPGIMG_1487.JPGIMG_1486.JPG



Attachments
__________________

RHL "Collector of Fine Scrap Iron"



Status: Offline
Posts: 107
Date:

Hi Grady,

Currently I have the original OD box out of my car.
If you need any detailed pics or dimensions of it, please let me know.

Not sure, but looks like the long non OD tail piece has a different bolt pattern to the box than the OD.

Or is there some intermediate plate?

12.JPG



Attachments
__________________


Status: Offline
Posts: 107
Date:

So an adapter plate it is

13.JPG



Attachments
__________________


Status: Offline
Posts: 34
Date:

The adapter plates are available new. I have replaced several as they get bent and don't seal. Have gotten some from OD spares in the UK. 

when mating the OD to the adapter be very careful, if you use the bolts to pull it together, the plate will bend.

 

Dean

 



__________________


Status: Offline
Posts: 32
Date:

Hi Grady,

Hopefully you have another box of parts somewhere. In your pics parts #39-57 are missing as well as the adaptor plate. These are a challenge to rebuild properly but can be done.

Greg
Your neighbor in MN.

__________________


Status: Offline
Posts: 14
Date:

Thanks everyone, really.

Is it worth doing this overdrive system? If you were in our shoes and rebuilt original trans did not have the OD system would you leave it?  My grandfather didn't know that there was an overdrive set up included with the car because there were many boxes and wasn't on the tranny.  I would like it on there but if you guys advise on the side of not using it please let me know.  I am going to search for those other parts which I believe we do have, somewhere.

 

Thanks again.  And please if you are in the United States and have a GT done or doing one or even had in the past please send me your phone number as I am so green with mechanical stuff I would greatly appreciate it as wisdom is better than knowledge.  And it is often not what you know, but WHO you know.

I could call Nigel and bother him haha but would prefer as many contacts as possible.

 

Truly a pleasure gentlemen,

Grady G. & RHL



__________________

RHL "Collector of Fine Scrap Iron"



Status: Offline
Posts: 451
Date:

Hi Grady,

You could always get in touch with your local Triumph TR clubs and go to one of their meetings and see who they can recommend or even supply parts and all that vital info your looking for, that's what clubs should be about.

Oh and the phones off the hook biggrin



__________________
Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard