The Peerless & Warwick Discussion Forum

Members Login
Username 
 
Password 
    Remember Me  
 
Back to Peerless-GT -> The Peerless & Warwick Register Forum Message Board -> Technical Help, What's It Off and Parts -> Diff carrier frame
Post Info TOPIC: Diff carrier frame
mikerf


Status: Offline
Posts: 699
Date:
Diff carrier frame
Permalink  

I think I tried this before but met with no sucess so I'll give it a go again.

Basically, I need to re-manufacture the diff carrier frame as mine was lost some time ago. I'm referring to the triangular frame that sits below the diff and connects to the chassis at 3 points.

I did have a technical drawing with all the dimentions marked up but lost it when my old PC died a few years ago.

If anyone could help, I'd really appreciate it as I'm hoping to start work on the Peerless next year.

It's amazing how many plans you can dream up for your pension pot biggrinbiggrinbiggrin



__________________
Erik V


Status: Offline
Posts: 320
Date:
Permalink  

I've sent this drawing before, but i can't recall to who.

Anyway, after a short search i found the drawing.
Don't know if you can read all dimensions on this, but i can also mail you the original.

Please let me know.

 

 

Diff carrier A-frame.jpg

-- Edited by Erik V on Monday 15th of September 2014 11:51:11 AM



-- Edited by Erik V on Monday 15th of September 2014 11:51:27 AM

Attachments
__________________
mikerf


Status: Offline
Posts: 699
Date:
Permalink  

Erik, it was me you sent it to and thank you so much for sending it again. I lost it when my old computer went belly up. It might be worth storing this in archives for others?

__________________
rkent47


Status: Offline
Posts: 71
Date:
Permalink  

Eric,

Fabulous!! Any such technical renderings are priceless! Art and I will keep digital and hard copies!

Kent



__________________
Kent Too much iron, too little time
nigel c


Status: Offline
Posts: 858
Date:
Permalink  

Brilliant Erik, where did this come from? and can you send me a hi res copy that I can put in the archive??

 



__________________
Erik V


Status: Offline
Posts: 320
Date:
Permalink  

I modelled this myself in 3D, the previous time Mike asked for it.

I must have some sheet metal laser files and models for the turrets also, because i made a new pair for my new chassis.

Also i have a couple of Autocad drawings of the chassis, but only the main dimensions if i recall correctly.

 

No problem in sharing those files and drawings, next week when i'm back at work i'll look them up.

Dimensions are all in mm, so you guys should buy a correct tape measurebiggrin



-- Edited by Erik V on Thursday 18th of September 2014 08:43:12 PM

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Back to Peerless-GT -> The Peerless & Warwick Register Forum Message Board -> Technical Help, What's It Off and Parts -> Diff carrier frame
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard