The Peerless & Warwick Discussion Forum

Members Login
Username 
 
Password 
    Remember Me  
 
Back to Peerless-GT -> The Peerless & Warwick Register Forum Message Board -> Technical Help, What's It Off and Parts -> OUTER WINDOW SEAL
Post Info TOPIC: OUTER WINDOW SEAL
bentfender


Status: Offline
Posts: 3
Date:
OUTER WINDOW SEAL
Permalink  

COULD ANYONE TELL ME IF OUTER WINDOW SEALS ARE AVIALABLE, AND IF SO, WHERE CAN THEY BE PURCHASED?

BEST REGARDS . . . MAJOR C. D. BENFENDER RET.



__________________
Frank

Date:
Permalink  

You need to be more specific, which window?

All window seals are available from   http://www.woolies-trim.co.uk

The only awkward part is the outer blade on the opening door window
wich is a rubber strip inside an aluminium U construction.  Providing
you still have the aluminium part, replacement rubber strip 88-50-1
will do the job.

Frank

  


__________________
bentfender


Status: Offline
Posts: 3
Date:
Permalink  

THANKS FRANK, THAT'S A GREAT HELP, AND I'M SORRY THAT I FAILED TO SAY THAT IT WAS DOOR WINDOW OUTER SEALS THAT I AM LOOKING FOR.

THANKS AGAIN . . . CDB



__________________
Steve


Status: Offline
Posts: 43
Date:
Permalink  

And what is a good solution if there is no aluminum u?  Can you post a picture of what the aluminum u looks like?  



__________________
Frank

Date:
Permalink  

Photos...

Sorry, camera struggles a bit with close-ups.

Outer View

http://www.flickr.com/photos/wgt-15/8256454799/in/photostream

Inner View

http://www.flickr.com/photos/wgt-15/8256458991/in/photostream

End view showing the "ridge" which locates on the top of the door.

http://www.flickr.com/photos/wgt-15/8256460329/in/photostream

 

If you have lost the ali strip then something like this would work, but you
wouldn't have the shiny trim at the bottom of the window glass.

http://www.woolies-trim.co.uk/p-1259-window-weatherstrip.aspx

 

Frank



__________________
nigel c


Status: Offline
Posts: 858
Date:
Permalink  

good work Frank. yea I had to go with the non-rubber trim but, given time I guess you could attach a bit of Ali to get the rightish look. dont worry, I wont knock points off thought!



__________________
Steve


Status: Offline
Posts: 43
Date:
Permalink  

I actually have one of those. Anyplace I can get another?

__________________
Frank

Date:
Permalink  

Write a letter to Santa c/o The North Pole if you think that you've been good enough..

If you can find someone with a swaging machine I guess you could make up
an acceptable substitute from an ali strip.  Given the rarity of Peerless doors, and
the difficulty of removoving these from behind the window glass when the little
screws have rusted into the GRP, you probably won't find any at an autojumble
anytime soon.

Good Luck!

F

 



__________________
Steve


Status: Offline
Posts: 43
Date:
Permalink  

What I figured.  I loaned the one I have to someone I know at a fabrication shop and he is going to ponder an easy way to make a duplicate.   If he comes up with a way for a reasonable price I will pass on the contact. 



__________________
nigel c


Status: Offline
Posts: 858
Date:
Permalink  

Steve,

love your style, that's what we need in this comunitity! if I can help let me knowsmile



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Back to Peerless-GT -> The Peerless & Warwick Register Forum Message Board -> Technical Help, What's It Off and Parts -> OUTER WINDOW SEAL
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard