The Peerless & Warwick Discussion Forum

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Door lock cylinder and cam


Status: Offline
Posts: 265
Date:
Door lock cylinder and cam


Does anyone recognise either of these fitments? As fitted to the Standard Vanguard. I understand (please correct me if necessary) that the barrel is a  Wilmot Breeden 'Union' FS type.

Standard 8 and 10 Spares, who supplied the new door handles, don't have either, so the hunt is on to track down more. Worst case scenario is to make a new cam from a block of round alloy billet. The barrel is the sticking point as it has a half circle lug on the end to fit the cam. I've yet to find reference to or another image of one anywhere. And boy have I looked.

The new door handles are excellent quality, requiring only very minor fettling to the old internals and a minor casting burr on one cam housing wall. The push buttons seem ever so slightly smaller too, but they still work fine.

All the best,

Gary



Attachments
__________________
Rust Never Sleeps - Cavity Wax and Valium Should Do It
Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard